Qualification summary
Based on National Occupational Standards (NOS), this Level 3 Diploma in Project Controls Practice and Techniques (RQF) teaches project control fundamentals and units on developing and scheduling practice and techniques, risk and opportunity management and more.
The objective of this vocational qualification is to provide recognition that a learner has demonstrated the required level of technical competence to work in project controls on projects in sectors such as engineering, manufacturing, construction, infrastructure, pharmaceuticals, utilities, transport and defence.
Find out more about National Occupational Standards
Where is this qualification delivered?
To complete this qualification learners must enrol with one of ECITB’s Approved Centres listed below.
20/20 Business Insight Limited
Course:
Certificate in Project Controls, Estimating, planning, Project Controls, project document managers' course
Qualification:
Level 3 and Level 6 Project controls
Elevator Business Centre, Arnhall Business Park, Westhill, AB32 6UF Get directionsto 20/20 Business Insight Limited
http://www.2020projectmanagement.com
0808 168 2020
enquiries@2020projectmanagement.com
View organisation20/20 Business Insight Limited
Bridgwater and Taunton College
Qualification:
Mechanical Fitting, Nuclear Engineering & Science, Pipefitting, Plating, Project Control
CCNSG:
CCNSG, CCNSG Test-Only
National College for Nuclear, Southern Hub, Rodway, Cannington, TA5 2LS Get directionsto Bridgwater and Taunton College
01278 655106
View organisationBridgwater and Taunton College
GenII Engineering & Technology Training Ltd
Course:
electrical installation, pipefitting
Qualification:
Design and Draughting, Electrical Fitting, Electrical Maintenance, instrument and controls, Mechanical Fitting, Mechanical Maintenance, Pipefitting, Plating, Project Controls
CCNSG:
CCNSG, CCNSG Test-Only
Lillyhall Industrial Estate, Blackwood Rd, Lillyhall, Workington, FK2 9AD Get directionsto GenII Engineering & Technology Training Ltd
01900 701300
Margaret.Edmondson@gen2training.co.uk
View organisationGenII Engineering & Technology Training Ltd
Humberside Engineering Training Association Ltd
Test:
mechanical fitting, Mechanical Joint Integrity, mechanical maintenance, Moving loads, Small Bore Tubing, supporting engineering construction activities
Course:
electrical maintenance
Qualification:
Erecting, Moving Loads, Pipefitting, Plating, Rigging, Welding
CCNSG:
CCNSG, CCNSG Test-Only
27-31 Dansom Ln S, Hull, North, HU8 7LA Get directionsto Humberside Engineering Training Association Ltd
01482 826635
View organisationHumberside Engineering Training Association LtdLakes College West Cumbria
Qualification:
Mechanical Fitting, Project Controls
Hallwood Road, Lillyhall Business Bark, Workington, CA14 4JN Get directionsto Lakes College West Cumbria
01946 839 300
View organisationLakes College West Cumbria
East Coast College
Qualification:
Electrical Fitting, Electrical Maintenance, Instrument & Controls, Mechanical Fitting, Mechanical Maintenance, Pipefitting, Plating, Project Controls
CCNSG:
CCNSG
St. Peter's Street, Lowestoft, NR32 2NB Get directionsto East Coast College
https://www.eastcoasttrainingacademy.co.uk/course/ccnsg/
01502 525041
trainingacademy@eastcoast.ac.uk
View organisationEast Coast College
The Engineering College
Test:
abrasive wheels, Electrical Installation, Electrical Maintenance, mechanical fitting, Mechanical Joint Integrity, mechanical maintenance, Moving loads, Pipefitting, Plating, supporting engineering construction activities, welding, welding engineering construction pipe, welding engineering construction plate
Course:
confined space, human performance, manual handling, Mechanical Joint Integrity, working at height
Qualification:
Mechanical Fitting, Pipefitting, Plating, Rigging
CCNSG:
CCNSG, CCNSG Test-Only
Monks Ferry, Birkenhead, CH41 5LH Get directionsto The Engineering College
https://www.theengineeringcollege.co.uk/
0151 666 1028
l.cairns@theengineeringcollege.co.uk
View organisationThe Engineering CollegeMiddlesbrough College
Test:
Mechanical Joint Integrity, mechanical maintenance, Pipefitting
Course:
abrasive wheels, confined space, Mechanical Joint Integrity, mechanical maintenance, pipefitting, working at height
Qualification:
Electrical Fitting, Pipefitting, Plating, Project Controls
Middlesbrough College, Dock St, Middlesbrough, TS2 1AD Get directionsto Middlesbrough College
01642 333 333
View organisationMiddlesbrough CollegeThe Assessment Service Centre
Qualification:
Project Controls Level 3 and Level 6
Suite 37, Edwin Foden Business Centre, Moss Lane, Sandbach, CW11 3AE Get directionsto The Assessment Service Centre
01270 763646
View organisationThe Assessment Service CentreTraining 2000 Ltd
Qualification:
Design and Draughting, Mechanical Fitting, Pipefitting, Project Controls, Steel Erecting
Furthergate Business Park,Harwood Street,Blackburn, BB1 3BD Get directionsto Training 2000 Ltd
01254 54659
View organisationTraining 2000 LtdT3 Training & Development Ltd
Qualification:
Design and Draughting, Project Controls
c/o The Business Village, Innovation Way, Barnsley, S75 1JL Get directionsto T3 Training & Development Ltd
01226 610201
View organisationT3 Training & Development LtdLondon Metropolitan College
Qualification:
Project Control and Techniques
3000 Hillswood Drive, KT16 0RS Get directionsto London Metropolitan College
http://www.londonmetropolitan.college
0208 090 0350
julie@londonmetropolitan.college
View organisationLondon Metropolitan CollegeTrain’d Up
Qualification:
Project Controls
Manor House, 129 Henderson Street, Bridge of Allan, FK9 4RQ Get directionsto Train’d Up
01786 643800
View organisationTrain’d Up
What is the qualification structure?
To achieve this qualification learners must complete all 12 mandatory units.
It takes the average candidate 1,850 hours to complete this qualification. This includes 870 hours of time with a teacher, trainer or assessor, the remaining hours are unsupervised time for learning and producing evidence to be assessed.
The amount of time taken to achieve this qualification is typically 36 months.
Qualification units
PC01
Project controls fundamentals and related safety, ethics, environmental sustainability and governance
PC02
Effective communication and behaviour
PC03
Risk and opportunity management
PC04
Commercial awareness and procurement activities
PC05
Scope interpretation including project controls planning
PC06
Work and cost breakdown and coding structures
PC07
Scheduling practice and techniques
PC08
Estimating practice and techniques
PC09
Developing the initial budget and baseline
PC10
Optimisation practice and techniques
PC11
Track progress: data flows, IT systems and managing detailed controls data
PC12
Analyse data and forecast out-turns
Find out more
Are you looking to take this qualification?
Find an approved centreWant to become an ECITB approved centre?
Find out moreAlternatively, contact our team on...
qualifications@ectib.org.uk